Sign in
Already have SolaX Cloud Installer Account
Or
Access to E-Learning
Contact Us
Sign in
Already have SolaX Cloud Installer Account
Or
Access to E-Learning
Contact Us
Contact Us
Our online learning platform is currently only open to Installer accounts in SolaX Cloud. If you wish to use the online platform, please send your account application to training.global@solaxpower.com

X1 BOOST G3

X1 Boost has superior performance with 200% oversizing and an in-built global MPP scan. It offers user-friendly monitoring with optional 10s data updates through WiFi and an app. It has assured safety and adaptability to home EV charger and heat pump solutions with optional protection features. It also has mass management and broad extension capabilities via Datahub and parallel solutions via Modbus.

  • Datasheet
  • Manual
  • QIG

FAQ

  • What is On-grid inverter?

    On-grid, or grid-tied, means the inverter can generate power when connecting to the grid. When the grid is disconnected or cut-off, the on-grid inverters will stop until the grid is back due to anti-islanding requirements.

    We have single phase from 600W to 8kW, and three phase from 3kW to 150kW. For more details, please refer to this page: https://www.solaxpower.com/x1-boost

  • Can I add battery as energy storage in the future?

    Yes, actually string inverters doesn't have battery management unit integrated. SolaX provides a string inverter + retro-fit + battery storage solution, which makes it possible to extend battery storage to existing string inverter system.

  • Where can I see the solar data?

    You can check the system information on SolaX Cloud via Wi-Fi, LAN or 4G dongle. The data includes voltage(U)/Current(I)/Power(Pin and Pout) of PV side and grid side, energy flow diagram, energy of self-use and export to the grid(*meter or CT installation is required) and other detailed info.

  • Can I see my energy consumption data at night?

    The on-grid inverter can be offline at sunset without enough solar input. If you still want to monitor your system at night, you will need SolaX on-grid inverter with a built-in AC auxiliary power supply(APS) and SolaX smart energy meter/CT to achieve 24 hours energy monitoring.

  • Which models of inverters does the EV-Charger compatible with to achive the Green and ECO mode?

    X1-Mini G3/G4

    X1-Boost G3/G4

    X3-MIC G2

    X3-PRO G2

    X1-Hybrid G4

    X3-Hybrid G4

  • Is it necessary to install a meter before on-grid inverter if it's connected to a Hybrid inverter?

    The second meter is used to monitor the power situation of the 3rd party on-grid inverter, is not necessary for the AC coupling system.

  • Is there any requirement for on-grid inverter when I use "Micro-grid" function on Hybrid inverter?

    It's working for any third-party on-grid inverter and there has 3 requirement for on-grid inverter:

    1. Support 'Response to an Increase in Frequency'

    2. On-grid inverter output power < Max Hybrid inverter EPS output power

    3. On-grid inverter output power < Max battery charging power

  • Do the string inverters support zero export control?

    Yes, the string inverters can achieve zero export control.

  • What are the advantages of the Micro-grid function?

    In the Micro-grid system, the on-grid inverter can still work when there has power outage.  The wasted on-grid inverter PV energy been saved.

  • Can I set the inverters without connecting to the web?

    Yes. You can use local mode or operate on the LCD screem directly.

  • Do all the string inverters have the LCD screen?

    X1-MINI G3/G4, X1-BOOST G3/G4, X1-SMART, X3-MIC G2, X3-PRO G2 equipped with LCD screen by default.

    For X3-MEGA G2 and X3-FORTH,  the LCD screen is optional. 

  • How to do zero injection control? Do I need energy meter?

    Yes, a meter or a CT is needed for export control(In the on-grid inverter series,only single phase on-grid inverters are compatible with CT,three phase on-grid inverters are not compatible with CT) . Once a meter or a CT is connected, you should configure the inverter via LCD screen(App for non-screen version). Go to setting item 'Export control' to enable meter(or CT) and then confirm how much power to inject to the grid. If you want zero injection, you just need to set the value to 0.

Solution

Installations video

About Cookies

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept All", you consent to our use of cookies.
Accept Reject