- DC Input: 200% oversizing, 16A current, 50V startup voltage
- Quick and easy configuration (WiFi&APP)
- Optional external RSD (Rapid Shutdown) and integrated DC AFCI protection (Optional)
- Master/Slave parallel solution via Modbus supported
On-grid, or grid-tied, means the inverter can generate power when connecting to the grid. When the grid is disconnected or cut-off, the on-grid inverters will stop until the grid is back due to anti-islanding requirements.
We have single phase from 600W to 8kW, and three phase from 3kW to 150kW. For more details, please refer to this page: https://www.solaxpower.com/x1-boost
Modbus solution: This solution is applicable to X3-PRO G2 and X1-BOOST G4. With the same series, it supports up to 5 inverters in different power sizes paralleled through Modbus.
Datahub solution: Datahub is a datalogging device, which can support all SolaX string inverters including X1-MINI G4, X1-BOOST G4, X3-MIC G2, X3-PRO G2, X3-MEGA G2, X3-FORTH and the maximum parallelling number is 60.
Yes, a meter or a CT is needed for export control(In the on-grid inverter series,only single phase on-grid inverters are compatible with CT,three phase on-grid inverters are not compatible with CT) . Once a meter or a CT is connected, you should configure the inverter via LCD screen(App for non-screen version). Go to setting item 'Export control' to enable meter(or CT) and then confirm how much power to inject to the grid. If you want zero injection, you just need to set the value to 0.
Yes. (Only WiFi2.0/WiFi3.0/WiFi+LAN adaptations have been updated so far)
X1-MINI | G3.0 and previous verison | Wi-Fi2.0 | SW | Optional |
G3.1 | Wi-Fi3.0/Wi-Fi+LAN | SR/SN | Standard | |
G4.0 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
X1-BOOST | G3.2 and previous verison | Wi-Fi2.0 | SW | Optional |
G3.3 | Wi-Fi3.0/Wi-Fi+LAN | SR/SN | Standard | |
G4.0 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
X1-SMART | G1 | Wi-Fi2.0 | SW | Optional |
X3-MIC/PRO | G1 | Wi-Fi2.0 | SW | Optional |
G2 | WiFi3.0/WiFi+LAN | SR/SS/SN | Standard | |
X3-MAX/MEGA-G1 | - | Senergy Wi-Fi | Optional | |
X3-MEGA-G2 | - | Wi-Fi3.0/Wi-Fi+LAN | SR/SN | Optional |
X3-FORTH | - | Wi-Fi3.0/Wi-Fi+LAN | SR/SN | Optional |
X1-hybrid-G3 | - | Wi-Fi2.0 | SW | Optional |
X1-hybrid-G4 | G4.0 and previous version | Wi-Fi2.0 | SW | Optional |
G4.1 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
G4.3 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
X3-hybrid-G1/G2 | - | Wi-Fi2.0 | SW | Optional |
X3-hybrid-G4 | G4.1 and previous version | Wi-Fi2.0 | SW | Optional |
G4.2 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
G4.3 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
A1-hybrid | G1 | Wi-Fi2.0 | SW | Optional |
G2 | Wi-Fi3.0/Wi-Fi+LAN | SR/SS/SN | Standard | |
X1-AC | Wi-Fi2.0 | SW | Optional | |
J1-ESS | - | Wi-Fi2.0 | SW | Optional |
X1-SPT | Wi-Fi3.0 | SR | Standard |
This article gives an introduction of Solax ESS EV Charging solution, which includes the basic concept, key features, communication ports introduction and settings.
It expains what is Export Control, why need export control, how it works and how to setup on Solax Inverter.
This article explains what is ripple control, how to connect to ripple control receiver and how to setup.