X1 IES

This is an integrated residential ESS which comes with a 3-8kW hybrid single-phase inverter and extensible battery modules, plug and play, capacity ranging from 5 to 20 kWh. It has excellent performance in economy, safety and robustness. In addition, intelligent functions like VPP, micro-grid, smart schedule and smart scene are all ready. It would be the best choice for householders.

Datasheet
Manual
QIG

FAQ

What power bands are available for the X1 IES

The X1-IES is available in 6 models: 3 / 3.7 / 4.6 / 5 / 6 / 8 kW.
What kind of batteries does IES support? What is the quantity?

IES currently only supports HS50E batteries (5.1 kWh, 102V, stacked batteries);
●X1-IES, can be equipped with 1-4 batteries (5.1-20.4 kWh)
●X3-IES, available with 2-6 batteries (10.2-30.6 kWh)
Can Hybrid inverter provide whole house loads back-up function?

The EPS box can provide whole house loads back-up for hybrid inverter.

For X1/X3-Hybrid G4, the SolaX Matebox Advance can also achieve this function.
Is there beeping sound when inverter into EPS mode?

Yes, you can turn it off in setting. menu- settings- eps settings- mute
What is the switchover time? Is it reach UPS level?

10ms(UPS level) for single hybrid inverter. More than 10ms in parallel.
Does parallel system support 10ms switchover time?

No
Is it better to have a lower start voltage?

Yes, lower voltage means earler start-up.
What's the difference between Hybrid and FIT?

FIT models is to store the energy for on-grid inverter, it has no port to connet PV input.
Can we install Hybrid outdoor?

Yes, Hybrid series equipped with IP65 protection level. Pls follow the instruction of installation about the enviroment requirement
Is it necessary to install a meter before on-grid inverter if it's connected to a Hybrid inverter?

The second meter is used to monitor the power situation of the 3rd party on-grid inverter, is not necessary for the AC coupling system.
Where excess energy goes when PV energy is more than needs of loads and battery?

If you disable 0 export control, excess energy will be injected to grid. If you enable 0 export control, inverter will limite generation power.
Does it have to work with network?

No, but it's better to work online, as we can provide remote support if there is any issue happened.
If I have a parallel system with three hybrid inverters, Can I use different batteries for inverters

In the parallel system, Every hybrid inverter must have the same battery model and quantities.
In the datasheet, there are Max. PV array power and Max. PV input power, what is the difference between them, what do they mean?

The Max.PV array power is also known as the oversizing, which is 200% for our Hybrid G4. it means the maximum power of the array that the inverter can connected. And the Max. PV input power means the max power can be used by the inverter.
If I have a Solax Hybrid Inverter and a third-party String inverter in my house, how I can monitor the whole system

In this sytem, you need two meters, the first meter is at the Grid Connection Point, and the second meter is going to measure the output of the string inverters. Both meters are connecting to the hybrid inverter. Please note zero-export control is not avaialble in this system.

Do you have the compability list of the pocket and the inverters

Yes. (Only WiFi2.0/WiFi3.0/WiFi+LAN adaptations have been updated so far)

X1-MINI	G3.0 and previous verison	Wi-Fi2.0	SW	Optional
	G3.1	Wi-Fi3.0/Wi-Fi+LAN	SR/SN	Standard
	G4.0	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
X1-BOOST	G3.2 and previous verison	Wi-Fi2.0	SW	Optional
	G3.3	Wi-Fi3.0/Wi-Fi+LAN	SR/SN	Standard
	G4.0	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
X1-SMART	G1	Wi-Fi2.0	SW	Optional
X3-MIC/PRO	G1	Wi-Fi2.0	SW	Optional
X3-MIC/PRO	G2	WiFi3.0/WiFi+LAN	SR/SS/SN	Standard
X3-MAX/MEGA-G1	-	Senergy Wi-Fi		Optional
X3-MEGA-G2	-	Wi-Fi3.0/Wi-Fi+LAN	SR/SN	Optional
X3-FORTH	-	Wi-Fi3.0/Wi-Fi+LAN	SR/SN	Optional
X1-hybrid-G3	-	Wi-Fi2.0	SW	Optional
X1-hybrid-G4	G4.0 and previous version	Wi-Fi2.0	SW	Optional
	G4.1	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
	G4.3	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
X3-hybrid-G1/G2	-	Wi-Fi2.0	SW	Optional
X3-hybrid-G4	G4.1 and previous version	Wi-Fi2.0	SW	Optional
	G4.2	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
	G4.3	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
A1-hybrid	G1	Wi-Fi2.0	SW	Optional
A1-hybrid	G2	Wi-Fi3.0/Wi-Fi+LAN	SR/SS/SN	Standard
X1-AC		Wi-Fi2.0	SW	Optional
J1-ESS	-	Wi-Fi2.0	SW	Optional
X1-SPT		Wi-Fi3.0	SR	Standard

X1 IES

FAQ

Solution

Installation video

About Cookies