-
Overall power consumption ≤1 W
Green and low carbon, saving economy, sustainable development
-
Natural cooling fully sealed design for better reliability
Overall power consumption ≤1 W
Green and low carbon, saving economy, sustainable development
Natural cooling fully sealed design for better reliability
Yes, a meter or a CT is needed for export control(In the on-grid inverter series,only single phase on-grid inverters are compatible with CT,three phase on-grid inverters are not compatible with CT) . Once a meter or a CT is connected, you should configure the inverter via LCD screen(App for non-screen version). Go to setting item 'Export control' to enable meter(or CT) and then confirm how much power to inject to the grid. If you want zero injection, you just need to set the value to 0.
This article introduces single phase meter installation and setting.
The function of the current transformer (CT for short) is to convert the primary current with a large value into a secondary current with a small value through a certain transformation ratio, which is used for protection, measurement and other purposes.